CDM-625A Advanced Satellite Modem MN-CDM625A
Appendix M Revision 4
M–31
Use the screwdriver to reinstall the top cover onto the
CDM-625A chassis with its existing mounting hardware.
Plug the modem’s power cord back into its power source.
The CDM-625A VersaFEC-2 Option Card upgrade is now complete. You may turn on and resume use of the modem.
Before continuing, it is important that you make sure you are running the latest available firmware, and that you have
activated the necessary VersaFEC-2 FAST options.
• Chapter 4. UPDATING FIRMWARE
•
Chapter 5. FAST ACTIVATION PROCEDURE
To Next Page
Loading...
