Nano Series GigE Vision Camera Operational Reference • 167
8 Features Activation Mode cP_FeaturesActivationMode Enables the selected feature to be part of the cycling.
When activating the selected feature, this will
automatically set the corresponding standard camera
feature to read only.
Ver. 1.01
DFNC
Expert
Off Off Exclude the selected feature from the cycling.
Active Active Include the selected feature in the cycling.
Preset Configuration Selector cP_PresetConfigurationSelector Selects the cycling preset to configure. Ver. 1.01
DFNC
Expert
Cycling Preset Repeater cP_PresetRepeater Specifies the required number of cycling preset increment
events (generated by the Cycling Preset Incremental
Source) to increment the index of the Cycling Preset
Current Active Set. The difference with
cyclingPresetRepeater is that this feature value is specific
to the current cycling set specified by
cP_PresetConfigurationSelector.
Ver. 1.08
Exposure Time cP_ExposureTime Sets the exposure time (in microseconds) for the selected
set. The maximum frame rate is dependent on the
longest cycling exposure time.
Ver. 1.01
DFNC
Expert
Exposure Delay cP_ExposureDelay Sets the exposure delay (in microseconds) for the
selected set.
Ver. 1.01
DFNC
Expert
Gain Selector cP_GainSelector Selects which gain is controlled when adjusting cp_Gain
features.
Ver. 1.04
DFNC
Expert
Ver. 1.04
DFNC
Expert
Sensor SensorAll Applies to Sony sensor models: Gain is adjusted within
the sensor. The first half of the gain range is applied in
the analog domain and the second half is digital.
Sensor Analog SensorAnalog Applies to OnSemi sensor models: Analog gain is adjusted
within the sensor.
Gain cP_Gain Sets the selected gain as an amplification factor applied
to the image. This gain is applied when the current
Cycling index is active.
Ver. 1.04
DFNC
Expert
Ver. 1.04
Horizontal Offset cP_OffsetX Horizontal offset from the origin to the region of interest
(ROI). The value in this feature is only used when the
currently selected cycling preset is active.
Ver. 1.01
DFNC
Expert
Ver. 1.05
Vertical Offset cP_OffsetY Vertical offset from the origin to the region of interest
(ROI). The value in this feature is only used when the
currently selected cycling preset is active.
Ver. 1.01
DFNC
Expert
Ver. 1.05
Binning Horizontal cP_BinningHorizontal Number of horizontal photo-sensitive cells to combine
together. This increases the intensity of the pixels but
reduces the horizontal resolution of the image.
Ver. 1.03
DFNC
Expert
Ver. 1.03
Binning Vertical cP_BinningVertical Number of vertical photo-sensitive cells to combine
together. This increases the intensity of the pixels but
reduces the vertical resolution of the image.
Ver. 1.03
DFNC
Expert
Ver. 1.03
To Next Page
Loading...
Need help?
General
