EasyManua.ls Logo

Dell S4048T - Page 1238

Dell S4048T
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: The system reboots when the offline diagnostics complete. This is an automatic process. The
following warning message appears when you implement the offline stack-unit command:
Warning - Diagnostic execution will cause stack-unit to reboot after
completion of diags. Proceed with Offline-Diags [confirm yes/no]:y
After the system goes offline, you must reload or run the online stack-unit stack-unit-number
command for the normal operation.
2 Confirm the offline status.
EXEC Privilege mode
show system brief
3 Start diagnostics on the unit.
diag stack-unit stack-unit-number
When the tests are complete, the system displays the following message and automatically reboots the
unit.
Dell#00:09:42 : Diagnostic test results are stored on file: flash:/TestReport-
SU-0.txt
Diags completed... Rebooting the system now!!!
Mar 12 10:40:35: %S4810:0 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on stack
unit 0
Dell#00:09:42 : Diagnostic test results are stored on file: flash:/TestReport-
SU-0.txt
Diags completed... Rebooting the system now!!!
Mar 12 10:40:35: %S6000:0 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on stack
unit 1
Diagnostic results are printed to a file in the flash using the filename format TestReport-SU-<stack-unit-
id>.txt.
Log messages differ somewhat when diagnostics are done on a standalone unit and on a stack member.
4 View the results of the diagnostic tests.
EXEC Privilege mode
show file flash://TestReport-SU-stack-unit-id.txt
Examples of Running Offline Diagnostics
The following example shows the offline stack-unit id command.
The following example shows the show system brief command.
Dell#show system brief
Stack MAC : 00:01:e8:8b:5d:8c
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-----------------------------------------------------------------------------------
-
0 Management online S4810 S4810 9-4(0-89) 64
1 Member not present
2 Member not present
3 Member not present
Debugging and Diagnostics 1238

Table of Contents

Related product manuals