IMS.OM.002949.DRM Page 74 of 310 Version 1.4
Doremi Labs
You will be presented with the Doremi IMS1000 Login screen.
● Enter Username: doremi
● Enter Password: doremi
● Click the Login button.
6.8 Configuring the Device
In order for the projector to communicate with the IMS1000, the projector must be configured in
the Device Manager. When the projector and board have finished booting up, configure the
device in the Device Manager.
To access the Device Manager, go to Administration → Device Manager (Figure 80).
Figure 80: Device Manager
Select Projector from the New Device drop-down menu (Figure 81).
To Next Page
Loading...
