D 11 41
Item Designation Brief description
66
Main function
switch
Detent switch function and LED feedback:
- To lock all functions relevant to paving. Despite "Au-
to" settings in the individual functions, these are not
activated when the drive lever is swivelled out.
- Switch OFF by pressing the button again.
A
The preset vehicle can be relocated and released at the
new paving location. The paving process is continued
on swivelling the drive lever out.
A
On restarting, the function is set to "ON".
67 not used
68
Tamper
(screed-specific)
Button with detent switch function and LED feedback:
- Tamper ON and OFF function.
- Activation is carried out by swivelling the drive lever
out.
- Switch OFF by pressing the button again.
A
The main function switch must be set to the OFF posi-
tion.
A
The function is preset in conjunction with the "Set-up
mode" button.
69
Vibration
(screed-specific)
Button with detent switch function and LED feedback:
- Vibration ON and OFF function.
- Activation is carried out by swivelling the drive lever
out.
- Switch OFF by pressing the button again.
A
The main function switch must be set to the OFF posi-
tion.
A
The function is preset in conjunction with the "Set-up
mode" button.
To Next Page
Loading...
Need help?
General
