D 11 43
Item Designation Brief description
70 Screed relieving
Button with detent switch function and LED feedback:
- For relieving the screed to influence the traction force
and compaction ratio.
- Switch OFF by pressing the button again or switching
between screed relieving and screed charging.
- To preset the hydraulic oil pressure, switch this button and
the "Set-up mode" button to "ON".
71 Screed charging
Button with detent switch function and LED feedback:
- For relieving the screed to influence the traction force
and compaction ratio.
- Switch OFF by pressing the button again or switching
between screed relieving and screed charging.
- To preset the hydraulic oil pressure, switch this button and
the "Set-up mode" button to "ON".
To Next Page
Loading...
Need help?
General
