D 11 51
The conveyor's direction can be reversed in order to slightly reverse any paving ma-
terial which may be positioned just in front of the auger. This enables e.g. material
losses to be avoided during transportation.
- Switch the main function switch (1) to the "off" position (LED off).
- Keep one or both buttons (2) depressed for approx. 1 second.
The conveyor moves a distance of approx. 1 metre towards the hopper.
A
If necessary, this process can be repeated as often as required to allow the conveyor
to run further in the reverse direction.
To Next Page
Loading...
