Dynapac SD2500C User Manual

D 41 9
- If necessary, start the engine of the vehicle supplying power and leave to run for a
while.
Now try to start the other vehicle:
- Press the starter button (12) to start the engine. Do not let the starter run perma-
nently for more than 30 seconds; allow for a break of 2 minutes after every attempt!
- If the engine still has not started after two attempts, ascertain the cause!
- If the engine starts up: disconnect the starting aid cable again in reverse order.

Dynapac SD2500C Specifications

General

Brand	Dynapac
Model	SD2500C
Category	Construction Equipment
Language	English