E 10 59
A
When securing the bucket, make sure that the sensor plate is dismantled and the
front flap properly closed.
m
Diagonal lashing secures the bucket at the front and rear, using the lashing points on
the bucket and on the low-load trailer.
Fasten the lashing straps as shown.
A
Fasten the lashing straps diagonally to the bucket and to the lashing points on the
low-load trailer.
A
Use non-slip mats at the contact surfaces (1) and (2) as compensation for adjusting
the horizontal position of the bucket.
If necessary, use non-slip mats in combination with squared timbers. Use non-slip
mats at both top and bottom.
To Next Page
Loading...
