F 31 5
Check / replace chain:
A
At the latest, the conveyor chains (A)
must be replaced when their elongation
has progressed so far that they can no
longer be re-tensioned.
m
Chain links must not be removed to
shorten the chain!
Incorrectly dividing the chains would
lead to the destruction of the drive
wheels!
m
If components have to be replaced as a
result of wear, the following components
should always be replaced in sets:
- Conveyor chain
- Conveyor deflectors
- Conveyor plates
- Deflector plates
- Conveyor chain reversing rollers
- Conveyor drive chain sprockets
A
Your Dynapac customer service will be happy to provide support during maintenance,
repair and the replacement of wearing parts!
To Next Page
Loading...
