Dynapac SD2500C User Manual

F 54 23
- Carefully lever the multi-head (A) from
the tank surface by applying a suitable
slotted screwdriver around the edge.
Pull the head at the same time.
m
Do not pull the connection cable or con-
nection port!
- Carefully pull the multi-head up until
the lower part is beneath the
tank opening.
- Carefully tilt the lower part up and turn
the head until the lower part is at the
tank opening.
- Carefully pull the lower part out of the
tank opening.
A

Dynapac SD2500C Specifications

General

Brand	Dynapac
Model	SD2500C
Category	Construction Equipment
Language	English