Dynapac SD2500C User Manual

F 60 6
To change oil:
- To drain the hydraulic oil unscrew the
drain plug (D) at the bottom of the
tank.
- Collect the oil in a container using a
funnel.
- When returning the screw, make sure
to use a new seal.
A
When using the drainage hose (o):
- Unscrew seal cap (E).
- Screwing on the oil drainage hose (F)
opens the valve to let the oil drain out.
- Place the end of the hose in the
collecting vessel and let the oil drain completely.
- Unscrew the drainage hose and return the screw cap.
A
The oil should be changed when at operating temperature.
m
When changing the hydraulic oil also change the filter.
D
E
F

Dynapac SD2500C Specifications

General

Brand	Dynapac
Model	SD2500C
Category	Construction Equipment
Language	English