C 11 20
A
Four lifting eyes (1, 2) are provided for loading the vehicle with a crane.
A
Depending on the type of screed which is used, the paver finisher's centre of gravity,
with the screed mounted, is located in the area of the drive unit's rear reversing
roller (3).
- Secure vehicle wherever it is parked up.
- Engage the transport safeguards.
- Remove any attachments and extension parts from the paver finisher and the
screed until the basic width has been attained.
- Take off all protruding or loose parts and the gas bottles of the screed heater (see
chapters E and D).
- Lower the protective roof:
To Next Page
Loading...
Need help?
General
