Original Type:
Select the type of your original.
Remove Background:
Detects the paper color (background color) of the original document, and removes or lightens
the color. Depending on the darkness and vividness of the color, it may not be removed or
lightened
Sharpness:
Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the
sharpness.
ADF 2-Sided:
Scans both sides of originals placed in the ADF and sends a monochrome fax.
Continuous Scan(ADF):
Sending faxes by placing originals one by one, or by placing originals by size, you can send
them as one document at their original sizes.
“Sending Dierent Size Documents Using ADF (Continuous Scan(ADF))” on page 233
Original Size (Glass):
Select the size and orientation of the original you placed on the scanner glass.
Color Mode:
Select whether to scan in color or in monochrome.
Fax Send Settings:
Direct Send:
Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than
not using this feature.
You cannot use this feature when:
❏ Sending a fax using the ADF 2-Sided option
❏ Sending a fax to multiple recipients
“Sending Many Pages of a Monochrome Document (Direct Send)” on page 232
Priority Send:
Sends the current fax before other faxes waiting to be sent.
“Sending a Fax Preferentially (Priority Send)” on page 232
Send Fax Later:
Sends a fax at a time you specied. Only a monochrome fax is available when using this
option.
“Sending Faxes in Monochrome at
Specied
Time of the Day (Send Fax Later)” on page 233
Faxing
>
Menu Options for Faxing
>
Fax Settings
242
To Next Page
Loading...
Need help?
General
