Items Setting value and Description
IPv6 Setting You can specify whether or not to enable IPv6 Setting.
IPv6 Privacy Extension You can specify whether or not to enable IPv6 Privacy Extension.
IPv6 DHCP Server Setting You can specify whether or not to enable IPv6 DHCP Server Setting.
IPv6 Address When using IPv6 Address, enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx / prex
❏ xxxx is a hexadecimal number from 1 to 4 digits, and the prex is a decimal
number from 1 to 128.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
IPv6 Address Default Gateway When assigning IPv6 Address Default Gateway, enter in the following format.
Enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
IPv6 Link-Local Address Displays the valid IPv6 Link-Local Address.
IPv6 Stateful Address Displays the valid IPv6 Stateful Address.
IPv6 Stateless Address 1 Displays the valid IPv6 Stateless Address 1.
IPv6 Stateless Address 2 Displays the valid IPv6 Stateless Address 2.
IPv6 Stateless Address 3 Displays the valid IPv6 Stateless Address 3.
IPv6 Primary DNS Server Enter the IPv6 primary DNS server in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
IPv6 Secondary DNS Server When assigning IPv6 Secondary DNS Server, enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
IEEE802.11k/v You can specify whether or not to enable IEEE802.11k/v.
For models that support Wi-Fi, this item is displayed when the Wireless LAN
Interface is installed.
IEEE802.11r You can specify whether or not to enable IEEE802.11r.
For models that support Wi-Fi, this item is displayed when the Wireless LAN
Interface is installed.
Administrator Information
>
Managing the Printer
>
Managing the Network Connection
427