Epson WF-C5890 Series User Manual

3. Select in the following order.
Network Security tab > Protocol
4. Congure each item.
5.
Click Next.
6. Click OK.
e
settings are applied to the printer.
Related Information
& “Default Value of the Administrator Password” on page 19
& “Protocols you can Enable or Disable” on page 448
& “Protocol Setting Items” on page 449
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
iBeacon Settings You can enable or disable the iBeacon transmission function. When enabled, you can search
for the printer from iBeacon-enabled devices.
SLP Settings You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Cong.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
LPR Settings You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
RAW(Port9100) Settings You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
RAW(Custom Port) Settings You can specify whether or not to allow printing from the RAW port (custom port). When this
is enabled, you can print from the RAW port (custom port).
IPP Settings You can enable or disable the IPP function. When enabled, you will be able to print over the
Internet. It is also displayed when searching for devices on the network.
FTP Settings You can specify whether or not to allow FTP printing. When this is enabled, you can print over
an FTP server.
SNMPv1/v2c Settings You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
Administrator Information > Network Security Settings > Controlling Using Protocols
448

Epson WF-C5890 Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Print Resolution	Up to 4800 x 1200 dpi
Automatic Document Feeder	Yes, 50 sheets
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Display	4.3" color touchscreen
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Capacity	250 sheets
Fax Transmission Speed	Approximately 3 sec per page
Mobile Printing	Epson Connect, Apple AirPrint, Mopria Print Service
Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Print Speed	Up to 25 ppm (black/color)