Epson WF-C5890 Series

Protocol Description
SNMPv3 Settings You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
Related Information
& “Controlling Using Protocols” on page 447
& “Protocol Setting Items” on page 449
Protocol Setting Items
Bonjour Settings
Items Setting value and Description
Use Bonjour Select this to search for or use devices through Bonjour.
Bonjour Name Displays the Bonjour name.
Bonjour Service Name Displays the Bonjour service name.
Location Displays the Bonjour location name.
Top Priority Protocol Select the top priority protocol for Bonjour print.
Wide-Area Bonjour Set whether to use Wide-Area Bonjour.
iBeacon Settings
Items Setting value and Description
Enable iBeacon Transmission Select this to enable the iBeacon transmission function.
SLP Settings
Items Setting value and Description
Enable SLP Select this to enable the SLP function.
This is used such as network searching in EpsonNet Cong.
WSD Settings
Items Setting value and Description
Enable WSD Select this to enable adding devices using WSD, and print
from the WSD port. If you do not want this product to search
for devices, disable this item and disable the Enable IPP
item.
Printing Timeout (sec) Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Scanning Timeout (sec) Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
Administrator Information > Network Security Settings > Controlling Using Protocols
449