EasyManuals Logo
Home>Epson>All in One Printer>WF-C5890 Series

Epson WF-C5890 Series User Manual

Epson WF-C5890 Series
491 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
1. Connect the printer and hub (LAN switch) by Ethernet cable.
2. Select Settings on the home screen.
3. Select General Settings > Network Settings > Connection Check.
e connection diagnosis result is displayed. Conrm the connection is correct.
4. Tap OK to nish.
When you tap Print Check Report, you can print the diagnosis result. Follow the on-screen instructions to
print it.
Connecting to the Wireless LAN (Wi-Fi)
You can connect the printer to the wireless LAN (Wi-Fi) in several ways. Choose the connection method that
matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer
connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
& “Note when Using a Wi-Fi 5 GHz Connection” on page 53
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 53
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 54
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 55
Note when Using a Wi-Fi 5 GHz Connection
is printer normally uses W52 (36ch) as the channel when connecting to Wi-Fi Direct (Simple AP). Since the
channel for wireless LAN (Wi-Fi) connection is selected automatically, the channel used may
dier
when used at
the same time as a Wi-Fi Direct connection. Sending data to the printer may be delayed if the channels are
dierent. If it does not interfere with use, connect to the SSID in the 2.4 GHz band. In the 2.4 GHz frequency band,
the channels used will match.
When setting the wireless LAN to 5 GHz, we recommend disabling Wi-Fi Direct.
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Preparing the Printer and Making Initial Settings
>
Creating a Network Connection and Making S
53

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WF-C5890 Series and is the answer not in the manual?

Epson WF-C5890 Series Specifications

General IconGeneral
BrandEpson
ModelWF-C5890 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals