Items Settings and Explanation
User Name Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Password Enter a password to access a network folder in 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
FTP
Secure Connection Select FTP or FTPS according to the le transfer protocol the FTP server supports.
Select FTPS to allow the printer to communicate with security measures.
Save to Enter the server address between 1 and 253 characters in Unicode (UTF-16)
omitting "ftp://" or "ftps://". However, avoid using control characters (0x0000 to
0x001f 0x007F).
User Name Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Password Enter a password to access to an FTP server within 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not
specify this, leave it blank.
Connection Mode Select the connection mode from the menu. If a rewall is set between the printer
and the FTP server, select Passive Mode.
Port Number Enter the FTP server port number between 1 and 65535.
Certicate Validation The FTP server's certicate is validated when this is enabled. This is available when
FTPS is selected for Secure Connection.
To set up, you need to import the CA Certicate to the printer.
SharePoint(WebDAV)
Secure Connection Select HTTP or HTTPS according to the hyper-text transfer protocol the HTTP
server supports. Select HTTPS to allow the printer to communicate with security
measures.
Save to Enter the server address between 1 and 253 characters in Unicode (UTF-16)
omitting “http://”or "https://". However, avoid using control characters (0x0000 to
0x001f, 0x007F).
User Name Enter a user name to access an HTTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous. If you do
not specify this, leave it blank.
Password Enter a password to access to an HTTP server within 20 characters or less in
Unicode (UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If
you do not specify this, leave it blank.
Certicate Validation The HTTP server's certicate is validated when this is enabled. This is available
when HTTPS is selected for Secure Connection.
To set up, you need to import the CA Certicate to the printer.
Proxy Server Select whether or not to use a proxy server to access an HTTP server.
Preparing the Printer and Making Initial Settings
>
Preparing and Setting Up the Printer Accordin
…
91