15. User Chart Control
15-11
15.6.3 Line page
The Line page lets you
inscribe lines on a user chart.
To choose this page, push the
right mouse button (Next
Card), click the tab with the
left mouse button or hit the
NEXT key on the keyboard-
equipped control unit
Enable changes: Check in order to modify user chart.
Note: The user chart may only be modified in the Course-up or North-up mode.
Line box: Shows the current and total number of line points.
Name: Permits naming of current line.
Element type: User can choose appropriate line type from combo box. Available types are:
• Navigation line
• Route line
• Depth contour
• Coast line
Navigation and route lines may also be displayed on the ARPA radar screen.
Depth contours and coastlines are visible only on the ECDIS display.
Danger Line: Check to use line in chart alarm calculation.
Start position: Manually enter starting latitude and longitude in this box.
End position: Manually enter ending latitude and longitude of line in this box.
New start position: Check to draw a new line. If unchecked, any newly entered line will be
connected to previous line.
Add: This function adds new record next to current record. User can either edit
position by entering new co-ordinates or by showing new location with the
trackball and left mouse button.
Import: Choose a user chart from which to import lines.
Delete: This function deletes current record of line.
To Next Page
Loading...
