Furuno FEA-2107-BB - A5.2.4 Defining Subscription of C-MAP Charts

Appendix 5: C-MAP CM-93/2 Charts
AP-47
A5.2.4 Defining subscription of C-MAP charts
Before you can be an authorized operator of C-MAP charts you must do the following:
1. Purchase CD ROM(s) of C-MAP from your chart agent.
2. Load serial number of C-MAP into the ECDIS.
3. Choose charts that you want to use in the ECDIS, by zones or areas.
4. Generate operator code. This code is used to identify your chart folio for the producer of C-MAP.
5. Send operator code to your chart agent.
Based on operator code information, the producer of C-MAP charts is able to generate permission for the charts you
have chosen. You will receive an authorization code from the producer of C-MAP charts.
After receiving an authorization code, do the following:
1. Enter authorization code into the ECDIS.
2. Use the function "Load by CD ROM catalogue" to choose which chart to load.
3. Build a group of required C-MAP charts.
4. Load C-MAP charts using the function "View loaded CD ROM catalogue".