8. Vector Chart Material
8-21
8.4.5 Using SENC conversion history log
The system automatically records the results of all conversions into the conversion history log. You can view the
content of this log at any time by doing the following:
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the mouse functions area then push the right mouse
button.
2. Choose SENC Convert from the menu then push the scrollwheel to show the SENC Convert window.
3. After conversion (Conversion list is empty), click the Conv. History button.
Note: You can also activate the Conv. History from the "Failed SENC conversions" window.
A list of converted charts appears. You can view the status of converted charts on the list, and also source if it is
available.
4. Click the X at top right corner to close the window.
Below are examples of all possible results of conversion:
Perfect chart
Successful auto. conv: ENC: GB203000.000, edt: 1, upd: 0 / 1999 4 3
Perfect chart that is produced by a private chart producer (i.e., chart doesn't have ENC
status)
A private chart cannot fulfil SOLAS requirements and you must refer to a paper chart as legal primary aid of
navigation, when you navigate in the area covered by this chart.
Successful auto. conv: ENC: AS31MATT.000, edt: 1, upd: 0 / 1999 4 8 NON ENC
Conversion errors, but the chart is partly usable
Use cell status to check details of errors. Note that the chart is still ENC.
Successful auto. conv with errors: ENCD ROME416050.000, edt: 3, upd: 0 / 1998 6 12
To Next Page
Loading...
