Furuno FEA-2107-BB - A6.1.1 Exporting ECDIS Route Data into an Excel File

Appendix 6: Route Backup
AP-68
A6.1.1 Exporting ECDIS route data into an Excel file
Below is an example of how to export waypoints' name and latitude/longitude values to a Microsoft Excel table.
1. Place the cursor on Route in the status bar then click the Plan button to open the Plan Route dialog box. Place
the cursor on the triangle in the dialog box, choose Backup and Restore from the menu then push the
scrollwheel.
2. In the Hard Disk field, choose desired route then choose desired Backup Format (ASCII WPNAME POSITION).
3. Choose backup drive (A:\) from the Backup Device field then insert floppy disk in the processor unit of the
ECDIS. Click the Backup button.
4. Move floppy disk to computer where you can run Notepad and MS Excel applications.
5. Open the Notepad software then open the route chosen at step 2.
Content of Notepad looks something like this.
6. Copy text to the clipboard: Edit>Choose All then Edit>Copy.
7. Open the MS Excel software. Open a new Excel file then copy text from the clipboard to the MS Excel:
Edit>Paste.
Content of MS Excel looks something like the one above.