Furuno FEA-2107-BB - A5.2.8 Automatic Display until Setting; A5.2.9 Removing C-MAP Charts from the System

Appendix 5: C-MAP CM-93/2 Charts
AP-64
A5.2.8 Automatic display until setting
Display data may be set to system data automatically.
1. Open the Chart menu and choose SENC Convert Settings to show the following window.
2. Check Automatic Display Until.
A5.2.9 Removing C-MAP charts from the system
To remove C-MAP charts from the system, do the following:
1. Open the Chart menu.
2. Choose Remove Charts from the menu then push
the scrollwheel. The window shown right appears.
3. Choose desired chart cells to remove them from the
system. You can remove native data (A, B, CD
ROM; E, F or Z) or SENC format (snc).
4. Click the Remove button to remove selected C-
MAP charts from your hard disk.