31-1
31. Alarms
31.1 Overview
Alarms are displayed on the ENC screen at the lower right corner, indicated with "1" in the figure below. "2" in the
figure below is the alarm area, where you acknowledge alarms and display the Alarm Queue window which shows
alarms generated. To acknowledge an alarm or display the Alarm Queue window, put the cursor in the alarm area
then push the left mouse button to acknowledge an alarm or push the right mouse button to display the Alarm Queue
window.
xx.xx xx.xx
NorthUp TM
SB
(POSN)
COG
(POSN)
0.0 Kt
257.5
°
ECDIS
4010 Echo
Sounder Error
(POSN)
2007
True Vect(G) 12 nm
Past PosnTrue 2 min
CPA 10 nm 10 min
HDG 181.5°
SPD
(CALC)
13.1 Kt
SB
(POSN)
0.2 Kt
COG
(POSN)
181.5°
SOG
(POSN)
13.1 Kt
There are three kind of alarms generated by the ENC. To see a list of alarms, see "List of Alarms" on page 29-3.
To Next Page
Loading...
