Safety Instructions
ii
WARNING
NOTICE
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230
WARNING
CAUTION
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel should work
inside the equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can result.
Turn off the power immediately if
water leaks into the equipment or the
equipment is emitting smoke or fire.
Continued use of the equipment can
cause fire or electrical shock.
Do not place liquid-filled containers
on the top of the equipment.
Fire or electrical shock can result if a
liquid spills into the equipment.
Do not operate the equipment with
wet hands.
Electrical shock can result.
Do not allow rain or water splash to
leak into the equipment.
Fire or electrical shock can result if
water leaks into the equipment.
.
WARNING LABEL
A warning label is attached to the processor
unit. Do not remove the label. If the label is
missing or damaged, contact a FURUNO agent
or dealer about replacement.
The operator must read the safety instructions before attempting to operate the equipment.
SAFETY INSTRUCTIONS
Warning, Caution Prohibitive Action Mandatory Action
Indicates a potentially hazardous situation which, if not avoided,
can result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
THE BACKPLANE board (PCI-5S-RS-
R40, in the processor unit) has a
lithium battery. The battery should
only be replaced by a qualified
technician.
The battery may burst if it is the wrong
type or is incorrectly installed.
No one navigation device should
ever be solely relied upon for the
navigation of the vessel.
Always confirm position against all
available aids to navigation, for safety
of vessel and crew.
To Next Page
Loading...
