5-Module Frame, F-CU5, F-CU5P
27
Document no. M1125636-05
3. Remove the four screws (T20) at the bottom of the
F-CU5(P) frame.
4. Remove the cover of the frame.
To remove the PSM Connection Unit
1. Remove the two screws (T10) to disconnect the
PSM connector from the DFI board.
2. Remove the screw (T20) holding the PSM
Connection Unit.
3. Remove the four screws (T10)and disconnect the
Sync connector to detach the PSM Connection Unit
from the DFI board.
To Next Page
Loading...
