5-Module Frame, F-CU5, F-CU5P
29
Document no. M1125636-05
To remove the F-CU5(P) frame power
board
1. Remove the F-CU5(P) frame fan unit.
2. Remove thefive screws (T10).
To remove the module mother board
1. Remove the EMC cover from the frame. It is not
necessary to remove the F-CU5(P) frame power
board.
2. Face the frame module side towards you.
3. Remove the four screws (T10) holding the board
and its supporting plate.
4. Remove the four screws (T10) to detach the mother
board from the supporting plate.
To Next Page
Loading...
