GRAUPNER mc-32

220
Program description - Mix active / phase
MIX active/phase
Selecting free mixers for flight phases
Using the selection keys on the left or right touch pad,
page to the menu option …
Control switch
Logical switch
Phase settings
Phase assignment
Phase trim
Non-delayed chan
Timers (general)
Fl. phase timers
Wing mixers
Free mixers
MIX active/phase MIX only channel
Channel 1 curve
Switch display
Control switch
Logical switch
Phase settings
Phase assignment
Non-delayed chan
Timers (general)
Fl. phase timers
Helicopter mixer
Free mixers
MIX active/phase
… on the multi-function menu. Briefly tap the centre
SET key of the right touch pad to open this menu
option.
LinearMIX 1
LinearMIX 2
LinearMIX 3
6
EL
C1
EL
LinearMIX 4
3
8
S
EL
yes
SEL
yes
yes
yes
MIX ACTIVE IN PHASE
The "free mixers" on the previous menu can be ena-
bled and disabled for specific flight phases. You there-
fore have complete freedom in assigning specific
mixers only to specific flight phases.
Switch to your chosen flight phase and use the selec-
tion keys to page through this menu. The mixers on
the »Free mixers« menu are displayed in the centre
column.
Following the activation of the value field by briefly
tapping the centre SET key of the right touch pad, if
the respective mixer is set to "no" by using the selec-
tion keys on the left or right touch pad, then this mixer
is deactivated in the flight phase shown at the bottom
of the display and, simultaneously, removed from the
»Free mixers« menu list:
LinearMIX 1
LinearMIX 2
LinearMIX 3
6
EL
C1
EL
LinearMIX 4
3
8
S
EL
yes
SEL
yes
yes
MIX ACTIVE IN PHASE
no
If a mixer is "lost" in the »Free mixers« menu …
EL
LinearMIX 1
type
6
from – Begr. +
EL
C1
EL S
??
??
––––
LinearMIX 2
LinearMIX 4
LinearMIX 5
LinearMIX 6
to
Adjust
4
C4
7
off
off
off
??
??
––––
… then you should either switch through the flight
phases until it appears again … or, alternatively,
switch to this menu and temporarily reactivate the
mixer you are looking for:
EL
LinearMIX 1
type
6
from – Begr. +
EL
C1
8 3
EL
S
??
??
––––
LinearMIX 2
LinearMIX 3
LinearMIX 4
LinearMIX 5
to
Adjust
4
C4
7
off
off
off