GRAUPNER mc-32

286
Program description - Info display
Info display
Transmitter ID, date, time and memory card
Use the selection keys of the left or right touch pad to
scroll to the menu option »Info display« menu option
in the multi-function menu …
Profi trim
Trim memory
Telemetry Channel sequence
Multichannel Ring limiter
Mp3 player
Basic settings
Servo display Servo test
Code lock Info display
… in the multi-function list. A brief tap on the centre
SET key of the right touch pad will open this menu:
RFID
Firmware Version
date
time
SD-CARD
available
1.234
1933MB
99%
ABCDEF12
2011/11/11(Fr )
11:22:33s
1943MB
Transmitter-specific information is shown in this menu
and – insofar as necessary and beneficial – can also
be changed.
Programming
Select the appropriate line with the  selection
keys of the left or right touch pad then briefly tap on
the centre SET key of the right touch pad. The given
default value in the value field displayed in inverse
video can now be changed – insofar possible and
necessary – with the selection keys of the right touch
pad followed by another tap on the centre SET key to
conclude the entry.
RFID
RFID
Firmware Version
date
time
SD-CARD
1.234
ABCDEF12
2011/11/11(Fr )
11:22:33s
1943MB
The RF identification number of the transmitter is
shown in this line. It is transmitter-specific, is only
issued once per transmitter and cannot be changed.
During the connection process, this is sent to the re-
ceiver, among other things, so that it is always capa-
ble of identifying the radio signals of "its" transmitter.
Firmware version
RFID
Firmware Version
date
time
SD-CARD
1.234
ABCDEF12
2011/11/11(Fr )
11:22:33s
1943MB
The current version number of the transmitter soft-
ware is shown in this line.
Through a comparison of the number shown here
with the update version offered on the Internet down-
load page of the corresponding product under www.
graupner.de, you can determine whether a current
update of the transmitter operating system is avail-
able.
If applicable, the version number is also required for
inquiries with the service department.
Date
RFID
Firmware Version
date
time
SD-CARD
1.234
ABCDEF12
2011/11/11(Fr )
11:22:33s
1943MB
If necessary, select this line with the selection keys of
the left or right touch pad and, as necessary, select
the month or date field. After activating the respec-
tive value field with a tap on the centre SET key of
the right touch pad, the year, month or day can be set
with the selection keys of the right touch pad. Another
tap on the centre SET key of the right touch pad
will close the given entry. Years ranging from 2000
through 2135 are available for selection.
The abbreviated day of the week to the right outside
in brackets is automatically generated from the re-
spective date.
Notes:
•
If the transmitter is connected to a PC the
date and time can also be set through the
PC program provided for the respective
product in the Internet page at www.graupner.de.
• The date and time are protected against data
loss due to power failure by a buffer battery for
situations like a battery change, see page 20.