GRAUPNER mc-32

32
Transmitter description - Shortcuts and warning notices
Shortcuts
The following key combinations can be used to di-
rectly call up certain menus and options:
• CLEAR
A brief simultaneous tap on the  or 
keys of the right touch pad will reset a changed
parameter value in the active entry field back to its
default value.
• »Servo display«
A brief simultaneous tap on the  keys of the
left touch pad will change from the transmitter's
base screen or from almost any menu position to
the »Servo display« menu, see page 262.
• »Telemetry« menu
Tap the centre ESC key of the left touch pad for
about 1 s to call up the »Telemetry« menu from
the transmitter's base screen or return to the base
screen again, see text beginning on page 228.
• Graphic display of telemetry data
Briefly touching one of the selection keys of the
left or right touch pad will cause a jump from the
base screen directly to the transmitter's graphic
display of telemetry data or will allow paging back
and forth between individual graphic displays.
A brief tap on the centre ESC or SET key will
cause a return back to the base screen.
• »SECRET MODE«
(language selection and contrast)
Touch and hold the  selection keys of the left
touch pad then momentarily touch the SET key of
the right touch pad, see text beginning on the next
double-page.
• Entry lockout
Entry lockout is activated and deactivated from the
base screen by simultaneously touching the ESC
and SET keys for about 2 s.
• Quick-Select
From the multi-function list, a jump can be made
into a "Structure overview" by way of a brief,
simultaneous tap on the  or  keys of the
right touch pad. Menus are arranged in clear
groups in this overview.
Memory
Base servo sett. Transm. controls
Switches
Flight phases
Timers
Mixers
Special funct.
Global functions
All codes
Now the desired group can be selected with the
 selection keys of the left or right touch pad …
Memory
Base servo sett. Transm. controls
Switches
Flight phases
Timers
Mixers
Special funct.
Global functions
All codes
… then finally tap the centre SET key of the right
touch pad briefly. As soon as the key is released,
only the respective generic term for the given
menu will remain listed. For example:
Copy / Erase
Supress codes
Supress models
Model select
Now you can select the desired menu point using
the  or  buttons, and then call it up by
pressing the SET button of the right-hand four-way
button.