36
Transmitter description - Secret mode
SECRET MODE
TOP LCD CONTRAST
VOICE UPDATE
0
FIRMWARE UPDATE
BOTTOM LCD CONTRAST
0
When this process is fi nished, switch off the transmitter.
All settings stored in the transmitter remain intact
after a change of language has been made.
Notes:
•
If the warning …
RF
MUST BE
OFF
OK
… appears, then the transmitter's RF radiation is
still active. Jump to the »Base setup model«
menu, select the "RF transmit" line, select its
"OFF" option then repeat the procedure
• If the warning …
SD-CARD
INSERT
OK
… appears then the transmitter does not detect
a memory card in its card slot or the card found
cannot be read.
• If the selection window is empty …
FILE LIST
… then the transmitter could not nd an
appropriate le on the inserted memory card.
Check the contents of the SD card's "VoiceFile"
directory on a PC or laptop.
FIRMWARE UPDATE
Change display language
Important notice:
Be sure to check the charge status
of your transmitter's battery or
charge its battery as a precaution
before every update. Also backup all
occupied model memories so they can be
restored if that should become necessary.
SECRET MODE
TOP LCD CONTRAST
VOICE UPDATE
0
FIRMWARE UPDATE
BOTTOM LCD CONTRAST
0
In the same manner as described above in the sec-
tion "VOICE UPDATE", this menu item can be used to
update or change the transmitter's fi rmware, includ-
ing its display language. At the time of this manual's
printing, the standard SD card delivered with the set
includes the following languages:
• German
• English
• French
• Dutch
• Italian
• Spanish
Appropriate updates and information can be found on
the
mc-32 HoTT transmitter's product page under
the Download link at www.graupner.de.
FILE LIST
MC-32_1V234_ENGLISH.BIN
MC-32_1V234_FRENCH.BIN
MC-32_1V234_DEUTSCH.BIN
MC-32_1V234_DUTCH.BIN
MC-32_1V234_ITALIANO.BIN
Now use the selection keys of the left or right
touch pad to choose the desired fi rmware version, for
example:
FILE LIST
MC-32_1V234_FRENCH.BIN
MC-32_1V234_DUTCH.BIN
MC-32_1V234_ENGLISH.BIN
MC-32_1V234_DEUTSCH.BIN
MC-32_1V234_ITALIANO.BIN
Confi rm the choice with another tap on the centre
SET key of the right touch pad. The loading of fi rm-
ware into the transmitter's memory will be started and
following two displays, visible only very briefl y, which
only make reference to the fi rmware update …
To Next Page
Loading...
