GRAUPNER mc-32

236
Program description - Pro trim | Winged models
Pro trim
Flaps and aileron trimming
The mc-32 HoTT transmitter has an integrated
software function for direct trimming of all flaps and
ailerons.
This feature, named »Pro trim« because of its
functional similarity to the Profi-Trim module for the
mc-24 but only available on that transmitter as a re-
trofit option. Select this feature from the multi-function
menu with the selection keys of the left or right touch
pad…
Timers (general)
Fl. phase timers
Wing mixers
Free Mixer
MIX active/phase MIX-only channel
Dual mixer
Fail-safe adjust
Teacher / pupil Tx. output swap
Profi trim
Trim memory
… then open this menu option with a brief tap on the
centre SET key of the right touch pad.
PRO TRIM
AI
AI
FL
FL
Tr i m
off
off
off off
Contr free
on/off –––
SET
SET
SET
SET
free
free free
Programming procedure
Programming is done in three steps.
First of all, in the “Trim” line it will be established just
which flap pair is to be trimmed as “AI” and/or “FL”.
The “Control” line specifies the control channel over
which the given trim function is to be performed and,
finally, a switch is defined in the “ON/OFF” line by which
this profi-trim function can be switched on or off glob-
ally.
To set the desired option, move the marker frame
onto the desired line or column with the selection
keys of the left or right touch pad then briefly tap the
centre SET key of the right touch pad. Select the de-
sired entry in the field now displayed in inverse video
with the selection keys on the left or right touch pad
or move the desired transmitter control. Conclude the
procedure with a tap on the ESC key.
Trim
Notes:
•
Please note that, depending on the
number of aileron and ap servos
specied in the »Model type« menu (page
105), some settings cannot be used. For example,
with only 1 aileron and/or 1 ap servo there is no
aileron ap activation possible, and the opposite is
also true. Since this is the case, a number of
settings in various columns remain ineffective.
• Pay attention to potential double-assignments
when making trim control choices.
The trim functions which can be activated (ON) or
deactivated (OFF) on the first line of this menu, either
individually or in any combination, make pre-flight cor-
rections to aileron and flap settings quick and easy,
without the complexity of having to call up individual
setting options.
Individually, these are functions for …
• Trim of the aileron function for aileron ("AI")
• Trim of the ap function for aileron ("AI")
• Trim of the aileron function for flaps ("FL")
• Trim of the ap function for flaps ("FL")