162
Program description - Phase trim | Winged models
Phase trim
Flap settings specific to flight phases
Use the selection keys of the left or right touch pad to
scroll to the »Phase trim« menu option in the multi-
function menu:
Servo adjustment
Stick mode
Control adjust
Dual Rate / Expo
Channel 1 curve
Switch display
Control switch
Logical switch
Phase settings
Phase assignment
Phase trim
Non-delayed chan
Open this menu option with a tap on the centre SET
key of the right touch pad.
Normal
0%
ELEV
Depending on the settings made on the "Aileron/cam-
ber flaps" line of the »Model type« menu, page 94,
and in the »Phase settings« menu, page 142, this
menu offers at least one control function for ELEV …
Normal
0%
ELEV
Normal
… and, with the maximum of 4 for ELEV, AI, Al2,
FL and FL2 a total of five control functions for flight-
phase-specific trim settings.
The setting of the flight phase switches, to be defined
beforehand in the »Phase assignment« menu, de-
termines the line that is chosen. An asterisk marks
the flight phase currently active. At the same time, the
name of the respective flight phase is also shown at
the bottom left of the screen. You can enter settings
only for the currently active flight phase, e. g.:
Normal
0%
ELEV
Normal
0%
0%
0%
AI FL FL2
Launch
Thermal
Dist.
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
AI2
0%
0%
0%
Column “ELEV”
Settings in this column have a direct effect and ac-
cordingly on the trim indicator of the elevator trim in
the basic display. In return, the elevator trim controls
acts, if necessary depending on the setting “global
/ phase” in the line “ELEV” available at the transmit-
ter menus »Stick mode” (page 114 and 116), to the
values of this column “Global” or “phase” specific.
Spalten ”AI“, “AI2“, “FL“, “FL2“…
The values in these columns (max. 4) are identical to
those in the “Fl.pos” (flap position) line on the “Multi-
flap menu” within the »Wing mixers« menu.
For this reason, any changes made always affect the
other menu directly – and vice versa. After selecting
the appropriate column with the selection keys of the
left or right four-way button and a brief tap on the cen-
tre SET key of the right four-way button, these values
can be entered, independent of one another, with the
selection keys within a range of ±150 %.
A simultaneous tap on the or keys of the
right four-way button (CLEAR) will reset a changed
value in the currently active value field back to 0 %.
Important notice:
•
The possibly existing columns “AI“,
“AI2“, “FL“ and “FL2“ can be reached
by change with the selection keys of
the left or right four-way button on the right margin
and according to head back.
• Settings made in this column have an immediate
effect on elevator trim and, accordingly, the trim
setting display.
• Please note in this context that the “elevator”,
“aileron” and “rudder” trims are dened by default
as “ight phase specic” on the
mc-32 HoTT
transmitter. However, this standard setting can
be changed to “global” using the »Stick mode«
menu, page 114.
To Next Page
Loading...
