H3C S7500E Series Command Reference

4-4
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm frame-error-rate enable command to enable the frame error rate alarm.
Use the undo alarm frame-error-rate enable command to disable the frame error rate alarm.
By default, the frame error rate alarm is enabled.
Examples
# Enable the frame error rate alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm frame-error-rate enable
alarm llid-mismatch enable
Syntax
alarm llid-mismatch enable
undo alarm llid-mismatch enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm llid-mismatch enable command to enable the LLID mismatch frame alarm.
Use the undo alarm llid-mismatch enable command to disable the LLID mismatch frame alarm.
By default, the LLID mismatch frame alarm is disabled.
Examples
# Enable the LLID mismatch frame alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm llid-mismatch enable
alarm llid-mismatch threshold
Syntax
alarm llid-mismatch threshold threshold
undo alarm llid-mismatch threshold

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English