EasyManuals Logo

H3C S7500E Series Command Reference

H3C S7500E Series
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
3-31
undo uni-number multicast vlan { { vlan-id } & <1-50> | all }
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
vlan-id: Multicast VLAN ID, in the range 1 to 4094. &<1-50> means that you can provide up to 50
VLAN IDs for this argument.
all: Specifies all the multicast VLAN IDs.
Description
Use the uni multicast vlan command to add a UNI to the specified multicast VLAN(s).
Use the undo uni multicast vlan command to remove a UNI from the specified multicast VLAN(s).
This command takes effect only when the ONU works in the IGMP snooping mode.
Related commands: multicast-mode.
Examples
# Add UNI 1 to multicast VLAN 200 and multicast VLAN 3000.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast vlan 2000 3000
uni multicast-control multicast-address
Syntax
uni uni-number multicast-control multicast-address { multicast-address [ to multicast-address ] }
&<1-10> [ source-ip ip-address [ to ip-address ] ] rule { deny | permit [ channel-limit
channel-number ] | preview time-slice preview-time [ preview-interval interval-time |
preview-times preview-times [ reset-interval reset-interval-time ] ]* }
undo uni uni-number multicast-control multicast-address [ multicast-address [ to
multicast-address ] ] &<1-10>
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
multicast-address: Multicast IP addresses corresponding to the specified multicast channels. &<1-10>
indicates that you can specify up to 10 multicast IP addresses or multicast IP address ranges.
source-ip ip-address [ to ip-address ]: Specifies the IP address range of the multicast sources that
issue multicast channels. ip-address indicates the IP address of a multicast source.

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals