6-8
reset counters interface loopback
Syntax
reset counters interface [ loopback [ interface-number ] ]
View
User view
Default Level
2: System level
Parameters
interface-number: Number of the loopback interface, which can be the number of any existing
loopback interface. With this argument, the command clears statistics on a specified loopback
interface.
Description
Use the reset counters interface loopback command to clear statistics on loopback interfaces.
Before collecting traffic statistics within a specific period of time on a loopback interface, clear the
existing statistics.
If you do not specify the loopback keyword, this command clears the statistics on all interfaces in
the system.
If you specify the loopback keyword without the interface-number argument, this command clears
the statistics on all loopback interfaces.
Examples
# Clear the statistics on loopback interface Loopback 2.
<Sysname> reset counters interface loopback 2
reset counters interface null
Syntax
reset counters interface [ null [ 0 ] ]
View
User view
Default Level
2: System level
Parameters
0: Number of the null interface, which is fixed at 0.
Description
Use the reset counters interface null command to clear statistics on the null interface.
Before collecting traffic statistics within a specific period of time on the null interface, clear the existing
statistics.
If you do not specify the null keyword, this command clears statistics on all interfaces.
To Next Page
Loading...
Need help?
General
