3-9
Field Description
Maximum queues per port upstream : 4 Maximum number of upstream queues supported per port
downstream queues number : 4 Number of downstream queues
Maximum queues per port downstream : 4 Maximum number of downstream queues supported per port
battery backup : not support Whether battery backup is supported
forward error correction ability : support Whether Forward Error Correction (FEC) is supported
forward error correction mode : disable Whether FEC is enabled
queue sets number : 2 Number of queue sets supported
queue 1 : state:1 , value:0
queue 2 : state:1 , value:0
queue 3 : state:1 , value:0
queue 4 : state:1 , value:65535
queue 5 : state:1 , value:65535
queue 6 : state:1 , value:0
queue 7 : state:1 , value:0
queue 8 : state:1 , value:0
Queue states and thresholds. If the value of
state
is 0, it
means the queue is disabled; if the value of
state
is 1, it
means the queue is enabled.
Multicast-mode : multicast control Multicast mode: IGMP Snooping (IGSP) or multicast control
display uni-information
Syntax
display uni-information uni-number
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the display uni-information command to display the state information about the current UNI.
This command takes effect on H3C ONUs only.
To Next Page
Loading...
Need help?
General
