H3C S7500E Series Command Reference

4-15
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm onu-over-limitation enable
alarm port bit-error-rate enable
Syntax
alarm port bit-error-rate enable
undo alarm port bit-error-rate enable
View
ONU port view, OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm port bit-error-rate enable command to enable the port bit error rate alarm.
Use the undo alarm port bit-error-rate enable command to disable the port bit error rate alarm.
When both the total number of error bits and bit error rate of the data transferred between the OLT and
ONU exceed the alarm thresholds, the port bit error rate alarm occurs.
The threshold setting of the port bit error rate alarm is the same as that of the bit error rate alarm.
Related commands: alarm bit-error-rate.
By default, the port bit error rate alarm is enabled.
Examples
# Enable the port bit error rate alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt3/0/1
[Sysname-Olt3/0/1] alarm port bit-error-rate enable
alarm registration-error enable
Syntax
alarm registration-error enable
undo alarm registration-error enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm registration-error enable command to enable the registration error alarm.
Use the undo alarm registration-error enable command to disable the registration error alarm.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English