H3C S7500E Series

3-24
Examples
# Add port ONU3/0/1:1 to VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] port access vlan 3
port link-type
Syntax
port link-type { access | trunk }
undo port link-type
View
ONU port view
Default Level
2: System level
Parameters
access: Configures the link type of an ONU port as Access.
trunk: Configures the link type of an ONU port as Trunk.
Description
Use the port link-type command to configure the link type of an ONU port.
Use the undo port link-type command to restore the default link type of an ONU port, which is Access
by default.
After an ONU port is configured as a trunk port, the ONU port allows the packets of all the VLANs to
pass through.
Examples
# Configure port ONU 3/0/1:1 to be a Trunk port.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] port link-type trunk
port trunk pvid vlan
Syntax
port trunk pvid vlan vlan-id
undo port trunk pvid
View
ONU port view