1-19
<Sysname> display port-group manual
The following manual port group exist(s):
group1 group2
# Display detailed information about all port groups.
<Sysname> display port-group manual all
Member of group1:
GigabitEthernet2/0/3 GigabitEthernet2/0/4 GigabitEthernet2/0/5
GigabitEthernet2/0/6 GigabitEthernet2/0/7
Member of group2:
None
# Display detailed information about port group group1.
<Sysname> display port-group manual name group1
Member of group1:
GigabitEthernet2/0/3 GigabitEthernet2/0/4 GigabitEthernet2/0/5
GigabitEthernet2/0/6 GigabitEthernet2/0/7
Table 1-9 display port-group manual command output description
Field Description
Member of group Member of the manual port group
display storm-constrain
Syntax
display storm-constrain [ broadcast | multicast | unicast ] [ interface interface-type
interface-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
broadcast: Displays broadcast storm control settings and statistics.
multicast: Displays multicast storm control settings and statistics.
unicast: Displays unknown unicast storm control settings and statistics.
interface interface-type interface-number: Specifies an interface by its type and number with the
interface-type interface-number argument.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display storm-constrain command to display storm control settings and statistics.
To Next Page
Loading...
Need help?
General
