H3C S7500E Series Command Reference

9-20
link-aggregation load-sharing mode local-first
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
View
System view
Default Level
2: System level
Parameters
None
Description
Use the link-aggregation load-sharing mode local-first command to enable local-first load sharing
for link aggregation.
Use the undo link-aggregation load-sharing mode local-first command to disable local-first load
sharing for link aggregation.
By default, local-first load sharing is enabled for link aggregation.
Examples
# Disable local-first load sharing for link aggregation.
<Sysname> system-view
[Sysname] undo link-aggregation load-sharing mode local-first
link-aggregation mode
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
View
Layer 2 aggregate interface view
Default Level
2: System level
Parameters
None
Description
Use the link-aggregation mode dynamic command to configure an aggregation group to work in
dynamic aggregation mode.
Use the undo link-aggregation mode command to restore the default.
By default, an aggregation group works in static aggregation mode.
To change the aggregation mode of an aggregation group that contains member ports, remove all the
member ports from the aggregation group first.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English