H3C S7500E Series Command Reference

13-4
Field Description
Last clearing of counters
Time when the
reset counts interface vlan-interface
command was
last used to clear the interface statistics.
Never
indicates the
reset
counters interface
command has never been used on the current
interface since the device’s startup.
Last 300 seconds input: 0 bytes/sec
0 packets/sec
Last 300 seconds output: 0
bytes/sec 0 packets/sec
Average rate of input packets and output packets in the last 300
seconds (in bps and pps). This information is displayed only if the
current VLAN interface supports collecting interface statistics.
0 packets input, 0 bytes, 0 drops
Total number and size (in bytes) of the received packets of the
interface and the number of the dropped packets. This information is
displayed only if the current VLAN interface supports collecting
interface statistics.
0 packets output, 0 bytes, 0 drops
Total number and size (in bytes) of the sent packets of the interface
and the number of the dropped packets. This information is displayed
only if the current VLAN interface supports collecting interface
statistics.
display vlan
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-id1: Displays the information of a VLAN specified by VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays the information of a range of VLANs specified by a VLAN ID range.
all: Displays all current VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID of each dynamic VLAN. Dynamic VLANs
refer to VLANs that are generated through GVRP or those distributed by a RADIUS server.
reserved: Displays information of the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot do any configuration on reserved VLANs.
static: Displays the number of static VLANs and the ID of each static VLAN. Static VLANs refer to
VLANs manually created.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English