H3C S7500E Series Command Reference

3-19
onu bind batch
Syntax
onu bind batch [ slot slot-id ]
View
FTTH view
Default Level
2: System level
Parameters
slot slot-id: Specifies a slot by its ID.
Description
Use the onu bind batch command to enable batch ONU binding.
By default, batch ONU binding is disabled.
 With this command configured, only the current quiet ONU MAC addresses are bound to the ONU
ports, and the ONUs joining subsequently will not be bound.
 Do not configure this command together with the onu bind auto command.
Examples
# Enable batch ONU binding in slot 2.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] onu bind batch slot 2
onu-event
Syntax
onu-event { debug | log | trap } enable level severity
undo onu-event { debug | log | trap }
View
ONU port view
Default Level
2: System level
Parameters
debug: Displays the types of debugging information allowed to be output by the ONU on the OLT.
log: Displays the log information generated by the ONU on the OLT.
trap: Displays the trap information generated by the OLT on the ONU.
severity: Severity level of the information that the ONU reports to the OLT. The severity levels include
(in the descending order of priority):
emergencies, alerts, critical, errors, warnings, notifications, information, and debugging.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English