H3C S7500E Series Command Reference

1-7
Field Description
Administratively
The port was brought down with the
shutdown
command. To restore the
physical state of the interface, use the
undo shutdown
command.
Link-Aggregation interface
down
The aggregate interface corresponding to the aggregation group to which the
current interface belongs was shut down with the
shutdown
command.
OAM connection failure
OAM connection fails (possibly because the connection fails to be
established or the current connection is disconnected).
DLDP connection failure
DLDP connection fails (possibly because the connection fails to be
established or the current connection is disconnected).
Loopback detection-protected The interface is shut down because a loop is detected on it.
BPDU-protected The interface is shut down by the BPDU guard function.
Monitor-Link uplink down
The uplink of the current monitor link group to which the current interface
belongs is down.
display counters
Syntax
display counters { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display counters command to display traffic statistics for interfaces.
 If an interface type is specified, this command displays traffic statistics for all interfaces of the
specified type.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English