H3C S7500E Series Command Reference

1-6
Field Description
Link
Physical link state of the interface:
 UP: The link is up.
 DOWN: The link is physically down.
 ADM: The link has been administratively shut down. To recover its physical
state, perform the undo shutdown command.
 Stby: The interface is a standby interface.
Protocol Protocol connection state of the interface, which can be UP, DOWN, or UP(s).
The brief information of
interface(s) under bridge
mode:
Brief information about Layer 2 interfaces
Speed or Duplex: (a)/A -
auto; H - half; F - full
If the speed of an interface is automatically negotiated, its speed attribute
includes the auto negotiation flag, letter
a
in parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex mode
attribute includes the auto negotiation flag, letter
a
in parentheses or a capital
A
.
Letter
H
indicates the half duplex mode, and letter
F
indicates the full duplex
mode.
Type: A - access; T - trunk;
H - hybrid
Link type options for Ethernet interfaces
Speed Interface rate, in bps
Duplex
Duplex mode of the interface:
 A – auto-negotiation
 F – full duplex
 F(a) – auto-negotiated full duplex
 H – half duplex
 H(a) – auto-negotiated half duplex
Type
Link type of the interface:
 A – access
 H – hybrid
 T – trunk
PVID Default VLAN ID of the interface
Cause
Causes why the physical state of an interface is DOWN.
Table 1-2 provides the
details.
Table 1-2 Causes why the physical state of an interface is DOWN
Field Description
Not connected
No physical connection exists (possibly because the network cable is
disconnected or faulty).

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English