H3C S7500E Series Command Reference

3-18
Default Level
2: System level
Parameters
igmp-snooping: Specifies the IGMP Snooping mode.
multicast-control: Specifies the multicast control mode.
Description
Use the multicast-mode command to configure the multicast mode of the ONU.
Use the undo multicast-mode command to restore the default.
By default, the multicast mode of the ONU is IGMP Snooping.
Examples
# Configure the multicast mode of the ONU as the multicast control mode.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] multicast-mode multicast-control
onu bind auto
Syntax
onu bind auto [ slot slot-id ]
undo onu bind auto [ slot slot-id ]
View
FTTH view
Default Level
2: System level
Parameters
slot slot-id: Specifies a slot by its ID.
Description
Use the onu bind auto command to enable automatic ONU binding.
Use the undo onu bind auto command to disable automatic ONU binding.
By default, automatic ONU binding is disabled.
Do not configure this command together with the onu bind batch command.
Examples
# Enable automatic ONU binding.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] onu bind auto

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English