H3C S7500E Series Command Reference

2-13
Table 2-9 display onu-event interface command output description
Field Description
Date Date of the ONU event
Time Time of the ONU event
ONU Event
ONU event:
 Registration
 Deregistration
ONU Status
ONU status when an ONU event occurs:
 Up: when the ONU status is up, the ONU is deregistered.
 Down: when the ONU status is down, the ONU is registered.
display onuinfo
Syntax
display onuinfo { interface interface-type interface-number | slot slot-number }
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type, which can be OLT or ONU.
interface-number: OLT/ONU port number.
slot-number: Slot number of the EPON card.
Description
Use the display onuinfo command to display the information about all the ONUs under an OLT port,
ONU port, or the EPON card in the specified slot.
The displayed information includes ONU MAC address, LLID that OLT assigns to an ONU, actual
length of the optical fiber between an OLT and an ONU, bound ONU port number, ONU type, hardware
version, software version, EEPROM version, ONU status, and ONU MAC aging time.
Examples
# Display the information about all the legal ONUs under OLT 4/0/1 port.
<Sysname> display onuinfo interface Olt 4/0/1
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b90 1 2 Onu4/0/1:2 ET704-A-L/B 110/100 Up N/A
000f-e234-5678 0 N/A Onu4/0/1:1 N/A N/A Offline N/A
000f-e276-4b93 0 N/A N/A N/A N/A Silent 284s
--- 3 entries found ---
# Display the information about ONU port ONU 4/0/1:2.
<Sysname> display onuinfo interface Onu 4/0/1:2
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English