EasyManuals Logo

H3C S7500E Series Command Reference

H3C S7500E Series
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
2-14
000f-e276-4b93 1 2 Onu4/0/1:2 ET704-A-L/B 110/100 Up N/A
--- 1 entry found ---
# Display the information about all the ONUs on the EPON card in slot 4.
<Sysname> display onuinfo slot 4
-------------------------------- Olt4/0/1 -------------------------------
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b93 1 2 Onu4/0/1:2 ET704-A-L/B 110/100 Up N/A
000f-e234-5678 0 N/A Onu4/0/1:1 N/A N/A Offline N/A
-------------------------------- Olt4/0/2 -------------------------------
Error: The port's state should be up!
-------------------------------- Olt4/0/3 -------------------------------
Error: The port's state should be up!
-------------------------------- Olt4/0/4 -------------------------------
Error: The port's state should be up!
--- 2 entries found ---
Table 2-10 display onuinfo command output description
Field Description
ONU Mac Address MAC address of the ONU
LLID
Link ID that OLT automatically assigns to a registered ONU.
0
displays if the ONU
is not registered.
Dist(M)
Actual length of the optical fiber between the OLT and the ONU.
N/A
displays if the
ONU is not registered.
Port
Number of the port to which an ONU is bound.
N/A
displays if the ONU is not bound
to any ONU port.
Board/Ver
ONU model and PCB version number.
N/A
displays if the ONU is not registered.
Sft/Eeprom
ONU software version number and EEPROM version number.
N/A
displays if the
ONU is not registered.
State
State of an ONU:
Silent displays if the ONU is powered on but not bound to an ONU port.
Offline displays if the ONU is not powered on but bound to an ONU port.
Up displays if the ONU is started up and bound to an ONU port.
Down displays if the ONU is bound to an ONU port but is shut down manually.
Aging
MAC address aging time of an ONU in the silent state.
N/A
displays if the ONU is
not in the silent state.
Error: The port's state
should be up!
The OLT port is not UP.

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals