H3C S7500E Series - Deregister Onu; Display Dhcp-Client

3-3
Examples
# Configure the number of queue sets supported by ONU Report frames as 2.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] dba-report queue-set-number 2
deregister onu
Syntax
deregister onu
View
ONU port view
Default Level
2: System level
Parameters
None
Description
Use the deregister onu command to deregister the ONU under the ONU port.
Examples
# Deregister the ONU under ONU port ONU 3/0/1:1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] deregister onu
display dhcp-client
Syntax
display dhcp-client
View
ONU port view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp-client command to display the IP address allocation information when the ONU
serves as a DHCP client.
Examples
# Display the IP address allocation information when the ONU serves as a DHCP client.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] display dhcp-client
DHCP client statistic information: